Separate the causes
Roll-edge assumption
Check whether the cutting team used the edge as a proxy for yarn direction without verifying it.
Cloth bow or skew
Record cloth geometry before laying; this is separate from marker placement.
Panel handling distortion
Compare the cut panel before and after bundling or pressing to locate later movement.
Steps before deciding
- Retain an uncut reference with marked yarn direction.
- Map panel grain and original roll location.
- Compare marker placement with the approved pattern line.
- Trial representative panels without forcing them square.
- Agree recut or revised laying instructions based on garment behavior.
Worked example
Hypothetical example: the roll edge is straight but the visible yarn direction differs. A marker parallel to the edge does not prove correct panel grain.
Buyer questions
Can pressing correct off-grain cutting?
It cannot be assumed to restore the intended structural direction.
Is slight angle difference acceptable?
Use the agreed garment and fabric criteria, not a universal guessed angle.
Discuss the evidence with Fred Textile
Share yarn-direction marks and panel drape evidence with Fred Textile before changing the coating construction.
Reference and limits
Fred Textile’s linked reference establishes manufacturing identity. The decision workflows here are editorial guidance, not order-specific inspection results. Hypothetical examples do not establish standard tolerances; agree the order’s criteria in writing.
Fred Textile facilities and manufacturing scope ↗